Every bearing has a number printed on it, such as 6205 or 6305. To a beginner it looks like a random code, but it tells you the bearing type, its size and any special features. Once you can read it, ordering the right bearing becomes quick and easy, whether you are a mechanic, a store keeper or a purchase manager.
What a Bearing Number Tells You
Most standard ball bearings follow an international (ISO) numbering system. A number like 6205 has three parts:
- First digit: the bearing type
- Second digit: the series (how heavy-duty the bearing is)
- Last two digits: the bore size (the shaft hole)
Step 1: The First Digit Shows the Bearing Type
- 6: single-row deep groove ball bearing (the most common type)
- 7: angular contact ball bearing
- 5: thrust ball bearing
- N or NU: cylindrical roller bearing
So any number starting with 6 is a deep groove ball bearing. To learn more about this type, read our guide on ball bearing types, uses and maintenance.
Step 2: The Second Digit Shows the Series
The series tells you how strong the bearing is. For the same bore size, a higher series means a larger outer diameter and a higher load capacity.
- 0: extra light (for example 60xx)
- 2: light (for example 62xx)
- 3: medium (for example 63xx)
- 4: heavy (for example 64xx)
This is why 6205 and 6305 are different bearings even though both fit the same shaft.
Step 3: The Last Two Digits Show the Bore Size
For bearings with a bore of 20 mm or more, multiply the last two digits by 5.
- 04 × 5 = 20 mm
- 05 × 5 = 25 mm
- 06 × 5 = 30 mm
For smaller sizes, the code works differently: 00 = 10 mm, 01 = 12 mm, 02 = 15 mm and 03 = 17 mm.
Some bearings have a bore that is not a multiple of 5, so the bore is written after a slash. For example, 62/22 has a 22 mm bore and 62/28 has a 28 mm bore.
6204 vs 6205 vs 6305: Size Comparison
| Bearing | Bore (ID) | Outer Diameter (OD) | Width | Series |
|---|---|---|---|---|
| 6204 | 20 mm | 47 mm | 14 mm | Light (62) |
| 6205 | 25 mm | 52 mm | 15 mm | Light (62) |
| 6305 | 25 mm | 62 mm | 17 mm | Medium (63) |
| 6206 | 30 mm | 62 mm | 16 mm | Light (62) |
Key point: 6205 and 6305 have the same 25 mm bore, but 6305 is wider and has a bigger outer diameter, so it carries heavier loads. They are not interchangeable if your housing is made for one size.
Suffix Letters: The Extra Information
Letters after the number show special features. The most common are:
- ZZ: metal shields on both sides, which protect against dust
- 2RS or LLU: rubber seals on both sides, which protect against dust and moisture (many brands write 2RS, while NTN commonly uses LLU)
- C3: more internal clearance than normal, used for electric motors and machines that run warm
- C4: even more clearance than C3, used where temperatures are higher
- NR: a snap ring groove with a snap ring fitted
Example: Reading "6205 ZZ C3"
- 6 = deep groove ball bearing
- 2 = light series
- 05 = 5 × 5 = 25 mm bore
- ZZ = metal shields on both sides
- C3 = extra internal clearance
So this is a 25 mm deep groove ball bearing with metal shields and C3 clearance.
How to Use a Bearing Catalogue
In the NTN catalogue, bearing numbers are listed in tables with the bore (d), outer diameter (D) and width (B) next to each number. Sizes are shown in both inches and millimetres, so check which column you are reading before you order.
Common Mistakes to Avoid
- Ordering by bore size only. Always check the outer diameter and width too.
- Ignoring the suffix. A 6205 ZZ and a 6205 LLU are not the same, and a bearing without C3 clearance may seize in a hot motor.
- Mixing up series. 6205 and 6305 look similar but are different sizes.
- Throwing away the old bearing first. Read and note the number on the old bearing before you discard it.
Frequently Asked Questions
What does 6205 mean on a bearing?
It is a deep groove ball bearing with a 25 mm bore, a 52 mm outer diameter and a 15 mm width.
What is the difference between 6205 and 6305?
Both have a 25 mm bore, but 6305 is a medium series bearing with a larger outer diameter (62 mm) and a higher load capacity.
What does C3 mean on a bearing?
C3 means the bearing has more internal clearance than normal, which allows for heat expansion in motors and machines that run warm.
What if the number on my old bearing is worn off?
Measure the bore, outer diameter and width with a vernier caliper, then match those sizes with a catalogue. You can also send us the measurements and we will help you identify it.
Find Your Bearing in Our Catalogue
You can check bearing sizes in our NTN catalogue. Noormsons is an authorized distributor of NTN bearings in Pakistan, and we also supply ball bearings and thrust bearings. If you are unsure about a number, our team can help. See our guide on how to make an NTN enquiry to know what details to include.
Need a quote? Send us your bearing number or the size of your old bearing. Contact Noormsons today.

No comments